MAINTENANCE PLAN 4.7.1.e CHECKING THE RUBBER TRACKS Change the rubber tracks when they reach the prescribed wear limits. 1 1 - When the height “A” of the rubber claw is lower than 5 mm (0.2 in); if the height of the claw is below 5 mm (0.2 in), the risk of track slipping increases and the advance power will decrease accordingly. 1- Roller 2- Rubber track 2 A RWA06560 2 - When the steel reinforcement (3) can be seen on two or more points on the track. RWA06570 3 3 - When more than a half of the wires of the steel reinforcement positioned at the centre of the track are cut.
12 / 12 / RWA06580 4 - When one or more steel reinforcement units (4) come off the track or are ejected due to the excessive tension. 4 RWA06590 153