MAINTENANCE PLAN 161 4.7.3.c CHECKING THE FUEL LEVEL WARNING 1 • When refuelling, avoid spilling fuel to prevent any risk of fire. If some fuel should inadvertently be spilled, clean the dirty area immediately. • Fuel is flammable; neither use naked flames, nor smoke while refuelling. • Thrust the filling gun into the filler. 2 RWA06090 To check the fuel level, use the indicator provided on the dash- board (2); do not fill the tank completely, in order to leave space for the expansion of the fuel. CAUTION IMPORTANT 0 0 0 000 h • It is advisable to refuel after work, in order to avoid the for- mation of water condensate.
CHECK • After refuelling, tighten the filler cap (1) thoroughly and 2 lock the tank. OFF LOHI OFF12 RWA07480 1 2 WARNING • When refuelling, avoid spilling fuel to prevent any risk of fire. If some fuel should inadvertently be spilled, clean the dirty area immediately. • Fuel is flammable; neither use naked flames, nor smoke while refuelling. • Thrust the filling gun into the filler. To check the fuel level, use the indicator provided on the dash- board (2); do not fill the tank completely, in order to leave space for the expansion of the fuel.
RWA06090 CAUTION 0 0 0 000 h CHECK 2 OFF LOHI OFF RWA06090 CAUTION 0 0 0 000 h CHECK 2 OFF LOHI OFF IMPORTANT • It is advisable to refuel after work, in order to avoid the for- mation of water condensate. • After refuelling, tighten the filler cap (1) thoroughly and lock the tank. 12 RWA07480 12 RWA07480 4.7.3.d CHECKING THE ENGINE OIL LEVEL MAX. WARNING MIN. • Soon after the machine has been stopped the engine is very hot and may cause burns; let the engine cool down before carrying out any check. 1 The dipstick (1) can be reached by opening the engine hood (See “3.5.1 ENGINE HOOD”). The check must be carried out with cold engine and the machine RWA06100 positioned on level ground.
The oil level can be checked on the graduated dipstick (1) and must be included between the MIN. and MAX. marks; if the level is near the MIN. mark, top up with oil suitable for the ambient temperature, as prescribed in the lubricant chart. (See “4.3 FUEL, COOLANT AND LUBRICANTS”). IMPORTANT • If it is necessary to check the oil level during or soon after work, stop the engine and wait for 15 minutes before car- rying out the check. MAX. MIN. WARNING • Soon after the machine has been stopped the engine is very hot and may cause burns; let the engine cool down before carrying out any check. The dipstick (1) can be reached by opening the engine hood (See “3.5.1 ENGINE HOOD”).
The check must be carried out with cold engine and the machine positioned on level ground. The oil level can be checked on the graduated dipstick (1) and must be included between the MIN. and MAX. marks; if the level is near the MIN. mark, top up with oil suitable for the ambient temperature, as prescribed in the lubricant chart. (See “4.3 FUEL, COOLANT AND LUBRICANTS”). 1 RWA06100 1 RWA06100 IMPORTANT • If it is necessary to check the oil level during or soon after work, stop the engine and wait for 15 minutes before car- rying out the check.