Komatsu — 4.7.3.B CHECKING THE COOLANT LEVEL

MAINTENANCE PLAN 4.7.3 CHECKS BEFORE STARTING 4.7.3.a VARIOUS CHECKS WARNING Dirt, oil and fuel spread in the engine compartment near the hot areas may cause fires and damage the machine. Check if there are leakages frequently and carry out the necessary repairs immediately; if this occurs repeatedly, contact your Komatsu Dealer. Before starting the engine, check: 1. if there are loose screws or nuts; 2. if there are oil, fuel or coolant leakages; 3. if the work equipment is worn; 4. the track tension and wear; 5. the conditions and efficiency of the instruments and warning lights on the dashboard, of the working lights and of the horn. The other general checks concern safety, and precisely:

6. soundness of the safety belt; 7. soundness and legibility of the warning plates; 8. cleanliness of the handles used to reach the driver’s seat, cleanliness inside the driver’s cab. 160 4.7.3.b CHECKING THE COOLANT LEVEL WARNING • Do not remove the radiator cap; the coolant must be checked with cold engine, through the compensation tank. 1 WARNING • Do not remove the radiator cap; the coolant must be checked with cold engine, through the compensation tank. The coolant tank (1) can be reached after opening the engine hood: the coolant level in the tank must be included between the MINIMUM and MAXIMUM marks.

If necessary, add water or coolant and, if a constant and consid- erable decrease in the coolant level can be noticed, check the tightness of the radiator-engine unit and of the radiator casing. RWA06080 RWA06080