MAINTENANCE PLAN 165 4.7.4.c CLEANING THE AIR CLEANER CAR- TRIDGE WARNING 1 • Remove the air cleaner only after stopping the engine and do not start the engine if the air cleaner is open. • Always wear safety goggles during the cleaning opera- tions. RWA06150 IMPORTANT • In case of work in dusty places, this cleaning operation must be carried out more frequently. 3 The air cleaner (1) can be reached after opening the engine hood (See “3.5.1 ENGINE HOOD”). 4 To clean the element, proceed as follows: a - Remove the coupling (2) and release the filter from its sup- port. b - Remove the couplings (3) and the cover (4) and extract the 2 filtering element (5).
3 c - Hit the element slightly on the palm of your hand to eliminate RWA06160 the dust and blow compressed air on the inner surface, keep- ing the jet at a distance of about 15 cm (5.9 in) and making sure that the pressure does not exceed 4-5 bars (58-73 psi). d - Carefully clean the filter clogging cover (4) and the filter cas- ing, taking care to prevent any foreign body from entering the 5 suction duct and reassemble the unit, making sure that the ejector positioned on the cover is directed downwards. IMPORTANT • Change the filtering element after 5 cleaning operations or after one year.
RWA06170 RWA06180 1 WARNING • Remove the air cleaner only after stopping the engine and do not start the engine if the air cleaner is open. • Always wear safety goggles during the cleaning opera- tions. RWA06150 3 RWA06150 IMPORTANT • In case of work in dusty places, this cleaning operation must be carried out more frequently. 3 The air cleaner (1) can be reached after opening the engine hood (See “3.5.1 ENGINE HOOD”). To clean the element, proceed as follows: a - Remove the coupling (2) and release the filter from its sup- port. b - Remove the couplings (3) and the cover (4) and extract the filtering element (5).
c - Hit the element slightly on the palm of your hand to eliminate the dust and blow compressed air on the inner surface, keep- ing the jet at a distance of about 15 cm (5.9 in) and making sure that the pressure does not exceed 4-5 bars (58-73 psi). d - Carefully clean the filter clogging cover (4) and the filter cas- ing, taking care to prevent any foreign body from entering the suction duct and reassemble the unit, making sure that the ejector positioned on the cover is directed downwards. 4 2 3 RWA06160 5 4 2 3 RWA06160 5 IMPORTANT • Change the filtering element after 5 cleaning operations or after one year. RWA06170 RWA06180 RWA06170