Komatsu — 3.3.3 SWITCHES AND PUSH BUTTONS

INSTRUMENTS AND CONTROLS 1 - FAN SWITCH This is a two-speed switch that operates the fan motor. If operat- ed after the opening of the tap installed in the engine compart- ment, it ensures the circulation of warm air and serves as heating switch. (See “3.5.4 VENTILATION AND HEATING”). RWA07170 2 - WORKING LIGHT AND INSTRUMENT LIGHT SWITCH This is a rotary switch with three positions marked by the follow- ing symbols: OFF - 1- 2. 1 ) Enables the instrument light circuit 2 ) Enables the working light circuit RWA07180 3 - IGNITION SWITCH This is a rotary key switch with four positions marked by the fol- lowing symbols: « » - (OFF) - I - « » (START).

For further details on the use of this switch, see “3.6.2 START- ING THE ENGINE”. RWA23290 4 - ARM OVERLOAD ALARM SWITCH (if installed) This is a two-position rotary switch and, if operated, makes it possible to define when the capacity limit has been reached. RWA07200 72