INSTRUMENTS AND CONTROLS 5 - REVOLVING LIGHT SWITCH (if installed) This is a tow-position rotary switch and, if pressed, operates the revolving light. RWA07210 6 - HORN This push button is positioned on the right lever grip and serves to warn the persons in the vicinity at the beginning of work and in case of danger. RWA20870 73 7 - VARIABLE TRACK GAUGE CONTROL PUSH BUTTON (if provided) This button is positioned on the left joystick lever and when pressed it enables the hydraulic circuit of the variable track gauge. CAUTION • The track gauge widening or narrowing can be carried out with the blade control lever positioned at the operator’s right (see ”3.5.5 pos. 6 BLADE CONTROL LEVER”).
RWA28840 This button is positioned on the left joystick lever and when pressed it enables the hydraulic circuit of the variable track gauge. CAUTION • The track gauge widening or narrowing can be carried out with the blade control lever positioned at the operator’s right (see ”3.5.5 pos. 6 BLADE CONTROL LEVER”). When the button is released, the hydraulic circuit of the variable track gauge is disabled.