INSTRUMENTS AND CONTROLS If the levers are operated in directions that are inclined with respect to the machine axis, simultaneous move- ments proportional to the angle of inclination are obtained, since the two hydraulic distributors corresponding to each single function are engaged at the same time.
LEVER 1 (COMBINED MANOEUVRES) N - Neutral A - Arm opening and rotation to the left B - Arm opening and rotation to the right C - Rotation to the right and arm folding D - Rotation to the left and arm folding A B N D C RWA07280 LEVER 2 (COMBINED MANOEUVRES) N - Neutral A - Boom lowering and bucket folding B - Boom lowering and bucket opening C - Bucket opening and boom lifting D - Bucket folding and boom lifting A B N D C RWA07290 78 IMPORTANT • Before rotating the upper structure, make sure that the rotation locking pin is raised (released). • The horn is positioned on the right lever grip and must be used to warn the persons in the vicinity at the beginning of work and in case of danger.
• A push button (optional) to be used to enable the hydraulic oil flow to the variable track gauge circuit is provided on the left lever handgrip. • All movements are locked by shifting the safety device lever to the lock position (see pos. 8/9).