INSTRUMENTS AND CONTROLS 79 WARNING RWA07310 3 4 RWA07310 WARNING • Before carrying out any manoeuvre with these levers, the operator must be seated in the work position with fas- tened safety belt. • Before moving, make sure that the upper structure is di- rected towards the blade and that all the safety devices have been engaged; if the upper structure is turned by 180°, the controls are inverted. (See “3.6.5 HOW TO MOVE THE MACHINE”). • Failure to comply with these rules may result in serious accidents. 3 4 The levers (3) and (4) serve to operate the left and right travel motors, respectively, and control the forward and the reverse gear according to the movements indicated.
N - Neutral A - Forward gear B - Reverse gear A N B RWA07300 A N B RWA07300 IMPORTANT • As option the machine could be equipped with travel warning alarm which will be activated whenn moving the travel levers. • All movements are locked by shifting the safety device le- ver to the lock position (see pos. 8/9). 5 - BOOM SWING CONTROL PEDAL 1 WARNING • Always engage the safety device (1) when the use of this control pedal is not required, during travel and when park- ing the machine. If this control pedal is inadvertently pressed, it may cause serious accidents. This pedal controls the boom swing to the right and to the left ac- RWA05660 cording to the movements indicated.
N - Neutral A - Swing to the left B - Swing to the right IMPORTANT • All movements are locked by shifting the safety device le- ver to the lock position (see pos. 8/9). • The boom swing is useful when it is necessary to dig be- yond the track outline; do not use it during the work cycle. RWA05650 1 WARNING • Always engage the safety device (1) when the use of this control pedal is not required, during travel and when park- ing the machine. If this control pedal is inadvertently pressed, it may cause serious accidents. This pedal controls the boom swing to the right and to the left ac- cording to the movements indicated.
N - Neutral A - Swing to the left B - Swing to the right RWA05660 RWA05660 IMPORTANT • All movements are locked by shifting the safety device le- ver to the lock position (see pos. 8/9). • The boom swing is useful when it is necessary to dig be- yond the track outline; do not use it during the work cycle. RWA05650