Removing and installing camshaft, exchanging camshaft bearings Installing camshaft Fig. 4 Oil and insert the push rods. Oil the camshaft bearing bushes. Apply oil to camshaft and insert it carefully. Caution: Ensure that the bearings do not get dama- ged. 4 Fig. 5 Ensure that the marks on the crankshaft and the camshaft gear match. 5 Fig. 6 If the camshaft cover has been removed from the crankcase, it is to be inserted as follows: D Remove grease from bore and cover D Apply “Hylomar” sealing agent to bore and cover including chamfer D Carefully press in cover, taking care not to tilt it so that it jams D Ensure that there is no oil leakage 6 Measuring camshaft axial clearance Fig.
7 Remove screw plug or angle drive for tachometer from camshaft cover. Apply feeler of dial gauge to end of camshaft or to driving dog for tachometer. Set dial gauge to zero. 7 100