MAN — Removing and refitting alternator

Removing and refitting alternator Removing alternator D Relax V-belt and take it off the alternator pulley, see page 120 D Disconnect earth cable from battery Fig. 1 Disconnect terminals B+, B− (55 A alternator only), D+ and W from alternator. 1 Alternator − top-mounted Fig. 2 2 1 Remove lock nut А . Remove mounting bolt Б from bracket and take off alternator. 2 Alternator − mounted on bottom right-hand side Fig. 3 Remove lock nut А . 1 Remove mounting bolt Б from bracket and take off alternator. Attaching alternator The alternator is attached in reverse sequence to the removal procedure; ensure that the cable ter- minals do not get mixed up.

Check and if necessary correct alignment of the V-belt pulleys with each other. Tighten the mounting bolts to the specified torque. Tension the V-belt. 2 3 After attaching the alternator check to see whether it functions faultlessly. 118