MAN — Removing and installing speed pickup

Removing and installing speed pickup Fig. 1 The speed pickup is fitted to the bottom right-hand side of the flywheel housing. To remove it, disconnect cable from terminal, re- move the mounting bolts from the retaining plate and take it off together with the speed pickup. 1 Fig. 2 After the installation, distance “d” between the speed pickup and the gear ring of the flywheel must be checked and, if necessary, readjusted. d 2 Fig. 3 To do so, proceed as follows: D Loosen counter nut and unscrews speed pickup D Turn gear ring so that one tooth is in centre position relative to the thread bore D Screw in speed pickup until it stops D Turn it back by one revolution and fit counter nut 3 127