167 Torque guide values Reuse of used cylinder-head bolts Check Before used cylinder-head bolts are reused, they must be checked as follows: 90+3 L Length With each tightening, the bolts are deliberately stressed beyond the stretch limit and each L = shaft length tightening thus extends their length permanently. Shaft lengths “L” Largest permitted Surface in the case of new dimension The bolts must have a perfect surface, i.e. closed bolts phosphatisation and no rust stains. 109 mm 111 mm Rusted or damaged bolts or bolts stretched be- yond the maximum length are to be made unus- 144 mm 146 mm able immediately − e.g. by hammering the thread 168 mm 170 mm − and to be scrapped.
90+3 Shaft lengths “L” in the case of new bolts Largest permitted dimension 109 mm 111 mm 144 mm 146 mm 168 mm 170 mm