Removing and attaching fuel filter, exchanging filter cartridge Removing and attaching fuel filter Fig. 1 1 Remove the fuel lines А . Remove the mounting bolts Б and take off fuel filter. 2 Attachment is to be carried out in reverse se- quence. The fuel lines are to be fitted with new sealing rings. 1 1 Changing fuel filter cartridge Parallel fuel filter Only when engine is switched off Fig. 2 D Loosen filter cartridge by means of tape wrench, unscrew it by hand and take it off D Moisten the seals on the new filter cartridge with fuel D Screw on the filter cartridges and tighten them vigorously by hand D Bleed fuel system 2 D Check filter for leaks Caution:
Used fuel filters are classed as dangerous waste and must be disposed of accord- ingly. Change-over fuel filter Continuous operation (both filter halves in operation) Fig. 3 Where the changeover-type filter is installed, the servicing procedure is for the filter side requiring to be shut off with the engine running. During continu- ous operation, the selector lever should be placed in a position where both filter halves are in opera- tion. Right-hand filter cut out Caution: Do not leave selector lever in any inter- mediate position because this would be liable to interfere with fuel supply. If in doubt stop the engine to change the fuel filter.
Left-hand filter cut out 3 The filter cartridge is then to be exchanged as de- scribed under parallel box filter (Fig. 2). 37