Removing and attaching fuel filter, exchanging filter cartridge Bleeding the fuel system 1 Note: To bleed the fuel system switch on the “ignition” so that the EHAB will be open. Figs. 4 and 5 An arrow on the filter head indicates the direction of fuel flow. D Unscrew bleed screw А of first filter in direction of flow by one or two turns 4 D Actuate tappet of hand primer until fuel emerges without bubbles D Screw in the tappet of the hand pump again and tighten it D Close bleed screw again D Repeat this procedure at the second bleed screw D Check fuel system for leaks 5 38