MAN — Repairing engine water pump

Repairing engine water pump Fig. 5 Pull impeller off the pump bearing. For this purpose four threaded bores M8 are pro- vided. 5 Fig. 6 Align water pump housing on a suitable and stable surface. Use a suitable mandrel to press the water pump shaft together with bearing out of the housing. Shaft and bearing are encapsulated and ex- changed together only. Take off axial face seal. 6 Assembling water pump Fig. 7 Press in water pump bearing. Use a hollow mandrel to apply pressure to the bearing outer ring but not to the bearing shaft. Refit circlip. 7 Fig. 8 Press V-belt pulley flush on to bearing shaft. 8 46