Removing and installing valves Fig. 9 Screw valve assembly lever on to cylinder head. Insert the valve spring washers. Insert discs and valve springs. The word “TOP” facing upwards, the tight coils facing downwards. Replace damaged or weak springs. 9 Fig. 10 Compress the valve springs using assembly lever and insert the valve cone pieces. Use suitable tool to lightly knock back the valve springs to ensure that the valve cone pieces sit correctly. Caution: Ensure that the valve cone pieces sit cor- rectly, since valve cone pieces which jump out may cause considerable damage. 10 Measuring valve recess Fig.
11 D Place dial gauge holder and dial gauge on cylin- der head D Apply gauge tip under preload to cylinder head D Set dial gauge to “0” D Slew dial gauge towards the valve disc and read off retrusion, if necessary exchanging valve and valve seat insert 11 88