MAN — Replacing valve seat insert

Replacing valve seat insert Installing valve seat insert Fig. 4 Cool new valve seat insert down to approx. -200 ° C and insert it into the cylinder head (at an ambient temperature of approx. 20 ° C). Carry out check by driving it in until the stop is re- ached using pressing tool. Install valve guides. Note: When the valve seat inserts have been changed, the valve seats must be re- worked. 4 Note:

D After temperature equalization, machine valve seats D After machining, clean cylinder head and check for leaks using leak testing device D If the cylinder head is excessively heated (above +200 _ C, +390 _ F) the core hole covers (end covers) loose their tightness and must be exchanged D To do this, clean core holes, blow out channels and press in new core hole covers with “LOCTITE 648” and pressing mandrel 91