Reworking valve seat Reworking valve seat (with Mira precision valve seat machining device) Fig. 1 1 1 Driving crank 2 Toggle switch 3 Handle 4 Lubricating nipple 5 Mains connection 6 Magnetic flange with coil 7 Guide pipe 8 Slewing arm 9 Guide mandrel 10 Tool 11 Hex socket screw 12 Rotary head 13 Lubricating nipple 14 Jaccard lever 15 Guide ball 16 Feed nut with mm scale 2 16 3 14 15 13 4 12 5 11 6 10 7 8 9 1 Fig. 2 Select suitable guide mandrel, screw it in with a spanner (12 mm) and tighten it. Note: For extreme precision work the guide mandrel must fit snugly. Select and insert the tool with the corresponding seat width and the corresponding seat angle. 2 Fig.
3 Set the tool with a setting gauge and tighten it with the hex socket screw. Insert unit with guide mandrel into the valve guide. 3 92 1 2