6) PARKING BRAKE Brake piston Friction plate Disk plate Spring Cylinder block Brake piston chamber Spline 8007A2TM18A The parking brake is a kind of negative brake which consist of disk, brake piston, friction plate and spring. The cylinder block and disk are combined with a spline, and friction material is bonded on both sides of disk. The disk generates frictional force between the case, the friction plate and the brake piston by the force of spring and restricts the rotating force of the motor, achieving the best performance of the parking brake. When the pressurized oil flows into the motor, the plunger moves and the parking brake release port is opened.
After the oil flows into brake piston chamber, the thrust "F" is generated, corresponding to the pressure receiving surface of brake piston and the thrust "F" becomes larger than the force of spring "f", consequently the brake piston moves toward right. Then, the disk rotates freely between the flange holder and brake piston, and parking brake is released. When the motor is stopped, the plunger returns to the neutral position and the parking brake release port is closed. Consequently the pressurized oil in brake piston chamber flows into motor case, the parking brake acts by the force of spring. 2-70