Kaiyi — 2. MAJOR COMPONENT

2. MAIN CONTROL VALVE 7-22 Part name Inspection item Criteria & measure Casing ·Existence of scratches, rust or corrosion. ·#In case of damage in following section, replace casing. - Sliding sections of casing hole and spool, especially land sections applied with held pressure. - Seal pocket section where spool is inserted. - Sealing section of port where O-ring contacts. - Sealing section of each relief valve for main and port. - Sealing section of plug. - Other damages that may damage normal function. Spool ·#Existence of scratch, gnawing, rusting or corrosion. ·O-ring seal sections at both ends. ·#Insert spool into casing hole, rotate and reciprocate it.

·#Replacement when its outside sliding section has scratch (especially on seals-contacting section). ·#Replacement when its sliding section has scratch. ·#Correction or replacement when O-ring is damaged or when spool does not move smoothly. Poppet ·Damage of spring ·Damage of poppet ·Insert poppet into casing and function it. ·Replacement. ·#Correction or replacement when sealing is incomplete. ·#Normal when it can function lightly and smoothly without sticking. Spring and related parts ·#Rusting, corrosion, deformation or breakage of spring, spring seat, plug or cover. ·Replacement for significant damage. Around seal for spool ·External oil leakage.

·#Rusting, corrosion or deformation of seal plate. ·Correction or replacement. ·Correction or replacement. Main relief valve, port relief valve & negative control valve ·External rusting or damage. ·Contacting face of valve seat. ·Contacting face of poppet. ·O-rings and back up rings. ·Replacement. ·Replacement when damaged. ·Replacement when damaged. ·Replacement in principle.