Kaiyi — 2. MAJOR COMPONENT

7-29 4. TRAVEL MOTOR Wash all parts disassembly in treated oil and dry in the compressed air. Perform maintenance including replacement or corrections in accordance with the following criterion. No. Parts Name Appearance Allowance Replacement parts 6 Piston sub assembly When remarkable flaws or high surface roughness are found on each sliding surface Roughness : 0.8a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). Cylinder block kit / Perform lapping (#1000). Replace if flaws cannot be completely removed. When remarkable flaws or high surface roughness are found on surface of piston. Roughness :

1.2a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). When clearance between piston sub assembly and cylinder block bore is great. Clearance : 0.060 mm Cylinder block kit When looseness in shoe ball parts is great. Looseness : 0.4 mm 4 Cylinder Block When remarkable flaws or high surface roughness are found on the surface with the valve plate. Roughness : 0.8a Cylinder block kit / Perform lapping(#1000). Replace if flaws cannot be completely removed. When wear inside bore is great. Roughly : 1.6a Cylinder block kit When clearance between piston sub assembly and cylinder block bore is great. Looseness :

0.4 mm When abnormal wear and breakage develop on mating teeth. 5 Valve plate When remarkable flaws or high surface roughness are found on each sliding surface Roughness : 0.8 a There should be no seizure and remarkable flaws(over 0.02 mm in thickness). Cylinder block kit 7 8 Retainer plate Retainer holder When remarkable flaws or high surface roughness are found on each sliding surface. Roughness : 0.8 a There should be no seizure and remarkable flaws(over 0.02 mm in thickness). 7 Retainer plate 8 Retainer holder