Kaiyi — 8. TURNING JOINT

2) DISASSEMBLY 14 Before the disassembly, clean the turning joint. Remove bolts (14), washer (15) and cover (3). 15 (1) 3 21078DA10 (2) Remove O-ring (9). (3) Remove retainer ring (12), spacer (4) and shim (5). 8007A8TJ04 (4) Place body (1) on a V-block and by using a wood buffer at the shaft end, hit out shaft (2) to about 1/2 from the body with a hammer. Take care not to damage the shaft (2) when remove body (1) or rest it sideway. Put a fitting mark on body (1) and shaft (2). Secure with hand Wooden block V block Work bench 8-141(3) 210-7 Remove six slipper seals (6) and O-ring (8), from body (1). (5) 8007A8TJ05 8-137 8-137