Kaiyi — 8. TURNING JOINT

3) ASSEMBLY Clean all parts. As a general rule, replace oil seals and O-ring. Coat the sliding surfaces of all parts with engine oil or grease before installing. (1) Fix six slipper seal (6) and O-ring (8), to body (1). (2) Fit O-ring (7) to shaft (2). 8007A8TJ05 Set shaft (2) on block, tap body (1) with a plastic hammer to install. (3) 2 1 8007A8TJ06 (4) Fit shim (5), spacer (4) and retainer ring (12) to shaft (2). (5) Fit O-ring (9) to body (1). 8007A8TJ04 8-138 8-138