3) ASSEMBLY (1) Assemble cylinder head assembly Check for scratches or rough surfaces if found smooth with an oil stone. Coat the inner face of rod cover (5) with hydraulic oil. ① 21078DA37 ② Coat dust wiper (11) with grease and fit dust wiper (11) to the bottom of the hole of dust seal. At this time, press a pad metal to the metal ring of dust seal. Pres her (Straight down Press here (Straight down) Metal 11 1 Me ta 8007A8CY15 Fit back up ring (10), U-packing (9) and buffer seal (8) to corresponding grooves, in that order. Coat each packing with hydraulic oil before fitting it. Insert the backup ring until one side of it is inserted into groove.
③ Right Wrong 45078CY11 U-packing (9) has its own fitting direction. Therefore, confirm it before fitting them. Fitting U-packing (9) upside down may damage its lip. Therefore check the correct direction that is shown in fig. Push bar 9 8007A8CY16 8-153