(3) ① ② Install piston and cylinder head Fix the rod assembly to the work bench. Apply hydraulic oil to the outer surface of rod assembly (3), the inner surface of piston and cylinder head. Insert cylinder head assembly to rod assembly. Cylinder head assembly Rod assembly ③ 21078DA40 ④ Insert cushion ring (15) to rod assembly. Note that cushion ring (15) has a direction in which it should be fitted. 15 Insert 900L8CY20 Fit piston assembly to rod assembly. ⑤ Piston assembly · Tightening torque : 190 ± 19 kgf · m (1374 ± 137 lbf · ft ) 900L8CY21 23 24 22 900L8CY22 Insert the steel ball (23) into hole and tighten the set screw (24). · Tightening torque :
6.5 kgf · m (47.0 lbf · ft ) ⑦ 8-155 ⑥Fit piston nut (22) as specified torque. ·Tightening torque Item Bucket 22 Boom 22 Arm 26 Item kgf·m lbf·ft Bucket 22 250±25 1808±181 Boom 22 250±25 1808±181 Arm 26 250±25 1808±181