Kaiyi — 10. UNDERCARRIAGE

(2) Disassembly Apply pressure on spring (1-2) with a press. The spring is under a large installed load. This is dangerous, so be sure to set properly. · Spring set load : 49986 kg (110200 lb ) Remove bolt (1-6), locking plate (1-5) and locking ring (1-4). Take enough notice so that the press which pushes down the spring, should not be slipped out in its operation. Lighten the press load slowly and remove rear flange (1-3) and spring (1-2). ① 1-5 1-6 1-4 1-2 1-3 ② ③ ④ 80098UC14 Remove rod (1-12) and front flange (1-11) from body (2-11). ⑤ 2-11 1-11 1-12 80098UC15 ⑥ Remove grease valve (2-110) from body (2-11). Remove rod (2-12) from body (2-11).

⑦ 2-11 2-12 2-110 80098UC13 ⑧ Remove guide ring (2-16), back up ring (2-15), packing seal (2-14) and lock ring (2-13). 2-11 2-13 2-14 2-15 2-16 8007A8UC16 8-166 8-166