Kaiyi — 10. UNDERCARRIAGE

(3) ① Assembly Install lock ring (2-13), packing seal (2-14), back up ring (2-15) and guide ring (2-16). When installing packing seal (2-14) take full care so as not to damage the lip. 2-11 2-13 2-14 2-15 2-16 8007A8UC16 ② Pour grease into body (2-11), then push in rod (2-12) by hand. After take grease out of grease valve mounting hole, let air out. If air letting is not sufficient, it may be difficult to adjust the tension of crawler. Fit grease valve (2-110) to body (2-11). · Tightening torque : 7.0 ± 1.0 kgf · m (50.6 ± 7.2 lbf · ft ) 2-11 2-12 2-110 ③ 80098UC13 Install rod (1-12) and front flange (1-11) to body (2-11). ④ 2-11 1-11 1-12 80098UC15 8-167 8-167