Kaiyi — 10. UNDERCARRIAGE

Install spring (1-2) and rear flange (1-3) to rod (1-12). Apply pressure to spring (1-2) with a press and tighten locking ring (1-4). Apply sealant before assembling. During the operation, pay attention specially to prevent the press from slipping out. ⑤ ⑥ 1-4 1-3 1-2 1-12 80098UC17 ⑦ Lighten the press load and confirm the set length of spring (1-2). After the setting of spring (1-2), install locking ring (1-4), locking plate (1-5) and bolt (1-6). Press 1-6 ⑧ 1-5 1-4 1290mm 1-2 80098UC17A 8-168 8-168