. OPERATION MACHINE OPERATIONS AND CONTROLS Adjustment Seat Adjustment WARNING set the lock lever to the LOCK position to prevent any accidental (B) Adjusting reclining 3 - 91 When adjusting the position of the operator's seat, alw contact with th e control levers. Always adj ust the operator's seat before startin g each operatio n or w hen the operators ch ange shift. Adjust the operator's seat so control levers and switches can be operated freely and easily with the operator's d switches can b e operated freely and easi ly with the operator's back again st the backrest. (A) Fore-and- aft adjustment Pull lever (1) up, set the seat to the desired positi on, then release the lever.
adjustment: 160 mm (6.3 in) (16 stages) Fore-and-aft adjustment: 160 m m (6.3 in) (16 sta NOTICE seat can be reclined to a large angle when the seat is The operator's completely pus hed forward, but the reclining angle is reduced when the seat is moved backward. So return the seat to its uprig ht position before moving the sea t to the rear. Pull up leve r (2) and set the backrest to a position that is comfortable f or operation, then r elease the lever. Sit with your b ack against the se at backrest when adjusting. If your back is not ag ainst the backrest, the backrest may suddenly move forward. (C) Adjusting seat tilt ) down to adjust angle of the front of seat.
(4 stages) e angle at front of the seat, keep the lever pushed down and apply your weight to the rear of seat. Forward tilt Push lever (3 ) down to adjust a ngle of the front of seat. (4 stages To raise th e angle at front of the seat, keep the lever pushed d own and apply your weight to the rear of seat. To lower t he angle at front of the seat, keep th e lever pushed down and apply your weigh t to the front of seat. Rear tilt up to adjust angle of the rear of seat. (4 stages) Pull lever (4) up to adjust angle of the rear of seat To raise th e angle at rear of t he seat, keep leve r (3) pulled up, and st and up slightly to rem ove your weight from the seat.
he angle at rear of the seat, keep lever (3) pulled up, and apply your weight to the seat. : Up 13°, down 13° To lower t he angle at rear of the seat, keep lev er (3) pulled up, and apply your weight to t Amount of tilt : Up 13°, down 13°