. MAINTENANCE MAINTENANCE PROCEDURE WARNING doctor. the 4 - 47 CHECK LEVEL OF BATTERY ELECTROLY Carry out this procedure before operating the ma Do not use th e battery if the batt ery electrolyte level is below the LOWER LEVEL line. T his will accelerate deterioration inside of the battery and reduce the service life of th e battery. In addition , it m ay cause an explosion. The battery g enerates flammabl e gas an d there is da nger of explosion, d o not bring fir e or sparks near th Battery electr olyte is dangerous .
If it get s in your eye s or on your skin, w ash i t off with a large amount of water and co NOTICE When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LEVEL line. gh, it may leak and cause damage to the paint surface or corrode other parts. electrolyte level is too hi gh, it may leak and cause d amage to th e paint surface or c orrod e other pa When adding distilled water in c old weather, add it b efore starting opera tions in the m orning to prevent t he electrolyt freezing.
Inspect the bat tery electrolyte l evel at l east once a month and follo w the basic s afety procedures given belo Open cover (1 the machin are installed at When Checking Electrolyte Level from Side of Bat If it is possible to check the ele ctrolyte level from the side of the bat tery, check a 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. .
Use a wet cloth to clean th e area around the electrolyte check that the electrolyte level is betwee VEL (U.L.) and ry is wiped with LOWER LEVEL (L .L.) lines.