. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN SWING MACHINERY CASE WARNING the engine is stopped and may cause serious burns. Wait for the oil 6. Fully insert dipstick (G) into filler pipe, then remove it. CHANGE OIL IN PTO CASE WARNING the engine is stopped and may cause serious burns. Wait for the oil 4 - 66 Parts temperature to go down before perf orming this operation Refill capa city: Each 13 liters 1. 2. t 3. 4. 5. 1. Set a con catch the 2. Loosen d rain valve (P) und er the machine bod y, drain the oil, hen tight Replace en the drain plug a breather (1) at the gain. same time when changing the oil. Add the dipstick ( refill capacity of oil through the dipstick guide of G).
he oil on the dipstick with a cloth. 5. Wipe off t he oil on the dipsti 7. The oil le vel should be between the H and L marks on dipstick I 8. I (G). f the oil l evel is below the L mark, add oil through oil filler port (F). f the oil i s above the H mark, drain the excess oil from drain plug(P) a t bottom of machin e, and check the oi l level agai 9. I mmediat ely after changing the oil, oil level is v So opera te for one hour, th en check the oil lev Parts and oil a re at high temperatu re immediately after temperature to go down before perf orming this operation NOTICE Park the machi ne on flat ground and stop the engine.
Afte r waiting for more than 30 minutes after stoppi ng the engine, check the oil level. Refill capa city: 7.2 liters (1.9