Komatsu — EVERY 4000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE WARNING the the be a to on the right. 4 - 79 EVERY 4000 HOU Maintenance for every 10, 100, 250, 500, 1000, and 2000 h ours of service should be perfor med at the same time. CHECK WATER PU Check for leakage of oi l or water. If any problem i s found, ask your Komatsu distributor to carr y out disassembly and repair or replacement. CHECK STARTING Contact your Komatsu distributor to have the starting motor checked.

If the engine is started frequently, have this inspection carri ed out every REPLACE ACCUMULATOR (FOR CONTROL CIRCUI Replace the accumula tor every 2 years or every 4000 hour s, whichever The accumulator is charg ed with high-pressure nitrogen gas, so m istaken operation may cause an exp losion, which will lead to serious injury or damage . When handling the accumulator, always do as follows. The pressure in the hy draulic circuit cannot be completely remo ved. When removing the hydraulic equipment, do not stand in the direction that th the operation. e oil spurts out when carrying out the ope ration. In addition, loosen the bolts slowly when carrying out e accumulator.

me or dispose of it in fire. t or weld it. subject it to any impact. Do not disassemble th Do not bring it near fla Do not make holes in i Do not hit it, roll it, or When disposing of th e accumulator, the gas must be released. Please contact your Komatsu dist ributor to have this work carried out. If operations are c ontinued after the performance o ped, it will be impossible to releas accumulator has drop e to releas remaining pressure in the hydraulic circuit if there should . Please ask your Komatsu distribu or. failure on the machine replace the accumulat The accumulator is ins talled to the position shown in the di