Hino J05D / J08E — Hino J05D / J08E User Manual

Operation Section 1 ± 37 DTC Code Detection Item DTC Description Remarks P2128 Accelerator Position Sensor 2 Malfunction (Hi) Issued when accelerator position sensor 2 cannot be correctly detected. Check the sensor voltage. Possible short circuit to +B. P2228 Atmospheric Pressure Sensor Malfunction (Lo) Issued when the atmospheric pressure sensor (built into the engine ECU) is malfunctioning. If the malfunction occurs frequently, it is necessary to repair or replace the engine ECU. P2229 Atmospheric Pressure Sensor Malfunction (Hi) Issued when the atmospheric pressure sensor (built into the engine ECU) is malfunctioning.

If the malfunction occurs frequently, it is necessary to repair or replace the engine ECU. P2635 SCV Seizure Possible causes include an open circuit in the wiring between the engine ECU and SCV, and/or an SCV internal malfunction (seizure.) P2635 Pump Replacement Possible causes include an open circuit in the wiring between the engine ECU and SCV, and/or an SCV internal malfunction (seizure.) U0073 CAN 1 Abnormality (Engine) Issued when there is a communication malfunction with the VNT. U0101 Communication Disruption (Automatic Transmission) Issued when communication with the transmission ECU is lost.

U0101 Communication Disruption (Transmission) Issued when communication with the transmission ECU is lost U0104 Communication Disruption (Cruise) Issued when communication with the cruise ECU is lost. U0121 Communication Disruption (ABS) Issued when communication with the ABS ECU is lost. U0132 Communication Disruption (Air Suspension) Issued when communication with the air suspension ECU is lost. U0155 Communication Disruption (Meter) Issued when communication with the meter ECU is lost. U1001 CAN 2 Abnormality (Vehicle) Issued when there is a communication malfunction with other computers equipped in the vehicle.

U1122 Communication Disruption (EGR) Detected when there is a communication abnormality with the EGR actuation ECU. U1123 Communication Disruption (VNT) Possible causes include a malfunction in the VNT control unit, or a short/open circuit in the communication line between the control unit and engine ECU.