Hino J05D / J08E — Hino J05D / J08E User Manual

Operation Section 1 ± 38 (2) 2010 Model DTC Code Detection Item Remarks P0016 Crank/Cam Signal Synchronization Error P0045 DIAG Information 1 from Variable Nozzle Turbo (VNT) Controller DIAG Information 2 from VNT Controller P007B Intercooler Temperature Sensor Performance Invalid (Cranking) Intercooler Temperature Sensor Performance Invalid Low (Driving) Intercooler Temperature Sensor Performance Invalid High (Driving) P007C Intercooler Temperature Sensor Signal Too Low P007D Intercooler Temperature Sensor Signal Too High P0087 Rail Pressure Falls Below the Control Limit of the Target Pressure P0088 Rail Pressure Exceeds Upper Limit Rail Pressure Exceeds High Upper Limit Rail Pressure Exceeds the Control Limit of the Target Pressure P0096 Intake Air Temperature Sensor Performance Invalid (Cranking) Intake Air Temperature Sensor Performance Invalid Low (Driving) Intake Manifold Temperature Sensor Performance Invalid High (Driving) P0097 Intake Air Temperature Sensor Signal Too Low P0098 Intake Air Temperature Sensor Signal Too High P00AF DIAG Information 1 (Controller) From VNT Controller DIAG Information 2 (Controller) From VNT Controller P0101 Mass Air Flow (MAF) Meter Performance Invalid P0104 MAF Meter Signal Frequency Too Low MAF Meter Signal Frequency Too High P0106 Manifold Absolute Pressure (MAP) Sensor Performance Invalid P0108 MAP Sensor Signal Too High P0112 Intake Air Temperature Sensor Signal Too Low P0113 Intake Air Temperature Sensor Signal Too High