Fuel Recommendations and Specifications QSC8.3 and QSL9 Page V-6 Section V - Maintenance Specifications Fuel Recommendations and Specifications Fuel Recommendations Do not mix gasoline, alcohol, or gasohol with diesel fuel. This mixture can cause an explosion. WARNING CAUTION Due to the precise tolerances of diesel injection systems, it is extremely important that the fuel be kept clean and free of dirt or water. Dirt or water in the system can cause severe damage to both the fuel pump and the fuel injectors. Cummins Inc. recommends the use of ASTM number 2D fuel. The use of number 2 diesel fuel will result in optimum engine performance.
At operating temperatures below 0°C [32°F], acceptable performance can be obtained by using blends of number 2D and number 1D. NOTE: Lighter fuels can reduce fuel economy. NOTE: Engines equipped with diesel particulate filters require the use of diesel fuel with 30 ppm sulfur maximum. There are no acceptable substitutes. The viscosity of the fuel must be kept above 1.3 cSt at 40°C [104°F] to provide adequate pumping and lubricating characteristics to fuel system components. The following chart lists acceptable substitute fuels for this engine.