MAN Nutzfahrzeuge — Cable cross-section

Cable cross-section 134 Pin No.

Abbreviation Description Minimum cable cross-sec- tion to Bosch Y462 U04 015 (mm2) 1 MES O Activation for fuel-delivery actuator 2,5 Imax = 11 A 2 MES O Activation for fuel-delivery actuator 2,5 3 VHS O Control-slide mechanism 2,5 Imax = 6 A 4 VHS O Control-slide mechanism 2,5 5 MBR 1 Not used 6 LEB 1 Not used 7 WGS 1 Not used 8 LKS 1 Not used 9 RWG M Control rod position transducer measuring coil (RWG 2) 0,75 10 RWG R Control rod position transducer reference coil (RWG O) 0,75 11 RWG Y Control rod position transducer centre pick-off (RWG 1) 0,75 12 CAN O Not used 13 GND A Sensor ground 0,75 14 EAB 1 Electrical shut-down 1,5 Imax = 1 A 15 Bat + Batt.+ via main relay 2,5 16 Bat + Batt.+ via main relay 2,5 17 NBF 0, HZGO Needle movement sensor and auxiliary rpm sensor 0,75 18 Bat – Battery negative 2,5 19 Bat – Battery negative 2,5 20 DIA-B Diagnosis lamp 0,75 21 DZG 1 RPM sensor signal 0,75 22 HZG 1 Auxiliary rpm sensor signal 0,75 23 ZDR-E1 Intermediate engine speed control 1 0,75 24 BRK-E Not used 25 FMS-E Not used 26 KUP-E Not used 27 PWG 1 Pedal travel sensor signal 0,75 28 TDS-A Engine speed signal 0,75 29 MPS-A Multiplex signal 0,75 30 CAN-L Controller Area Network 1,0 (CAN-cabels twisted) 31 CAN–H Controller Area Network 1,0 (CAN-cabels twisted) 32 NBF 1 Needle movement sensor 0,75 33 LDF 2 – boost pressure sensor 0,75 34 KTF 1 Fuel temperature sensor 0,75 35 MDB 1 Multi-stage input (torque limitation) 0,75 36 LDF 1 Boost pressure sensor signal 0,75 37 FGB 1 Not used 38 EOL E Not used 39 LGS-E Idle speed switch signal 0,75 40 MST-E External engine cut–out 0,75 41 ZDR-E2 Intermediate engine speed control 2 0,75 42 MBR-E Not used 43 BRE-E Not used 44 FGR 1 Speed control device 0,75 45 PWG 2 Pedal travel sensor 0,75 46 HRL O Main relay 1,0 Imax = 1 A 47 K15-E Terminal 15, digit.

Data for control unit 0,75 48 ISO-K ISO-K link to ISO protocol 0,75 49 ISO-L ISO-L link to ISO protocol 0,75 50 TKS-E Door contact switch 0,75