MAN Nutzfahrzeuge — Resistor bank

Testing Resistor bank Driving speed Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Flash code: 8x long Fault path: Resistance for the sensors not present – speed of travel (pin 51) and torque limit (pin 35) Resistor bank defective, Resistance values incorrect Effect of fault: Reduction in power output Possible cause: Line break, short-circuit to ground, resistor bank Test precondition: EDC control unit disconnected Socked box connected 36 Test Measurement Corrective measures Resistor bank Measure resistance across Set-point values:

Pin 13 and Pin 35 500–520 Ω Pin 13 and Pin 51 2.8–3.2 kΩ – Check lines – Check plug connections – If no fault found, replace resistor bank