MAN Nutzfahrzeuge — Auxiliary rpm sensor

Testing Auxiliary rpm sensor Flash code: 14x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: Auxiliary rpm sensor Statically implausible Dynamically implausible Implausible with rpm sensor Effect of fault: If the rpm sensor also fails, the engine will be shut down Possible cause: Line break, short to ground, rpm sensor faulty, control unitfaulty Test precondition: Disconnect EDC control unit to ensure the engine cannot start up Socked box connected U > 2 V 38 Test Measurement Corrective measures Resistance Measure resistance at the socket box across pin 22 and pin 17 Set-point value:

800–1000 Ω – Check lines – Check plug connections – If no fault found, replace auxi- liary rpm sensor Engine speed signal Check signal at socked box at starting speed across pin 22 (+) and Pin 17 (–) with oscilloscope Set-point value: see diagram