MAN Nutzfahrzeuge — Fuel temperature sensor

Testing Fuel temperature sensor Flash code: 1x long, 1x short Fault indication: Fault is not indicated by the EDC indicator lamp Fault path: Fuel temperature sensor Effect of fault: This fault has no direct effect. The substitute value provided in the control unit for such events may result in a slight reduction in power output. Possible cause: Line break, short-circuit, fuel temperature sensor faulty, control unit faulty, fai- lure or contamination of cooling system. Test precondition:

EDC control unit disconnected Socked box connected 39 Test Measurement Corrective measures Sensor resistance (control unit disconnec- ted) Measure resistance at the socket box across pin 34 and pin 13 Set-point value: 1.3–3.6 KΩ at 15–30°C – Check lines – Check plug connections – Replace temperatur sensor – If no fault found, replace control unit Sensor voltage (control unit connected) Measure voltage at socket box between pin 34 and pin 13 Set-point value: 4,17–2,62 V at 10–50°C