Komatsu — INSTALLATION OF CARRIER ROLLER ASSEMBLY

DISASSEMBLY AND ASSEMBLY CARRIER ROLLER REMOVAL OF CARRIER ROLLER ASSEMBLY 1. Lower work equipment, then loosen lubricator (1), and relieve track tension. The adjustment cylinder is under extremely high pressure. Never loosen the lubricator more than one turn. If the grease does not come out, move the machine backwards and forwards. 2. Using hydraulic jack a , push up track to a position where carrier roller assembly can be removed, then remove carrier roller assembly (2). 1 2 INSTALLATION OF CARRIER ROLLER ASSEMBLY Carry out installation in the reverse order to removal. 1 # Adjust the track tension. For details, see TEST- ING AND ADJUSTING, Testing and adjusting track tension.

Thread of carrier roller assembly mounting bolt: Thread tightener (LT-2) 2 30-78