PTO and Pump Electrical Controls 54.38 Troubleshooting PTO and Fire Pump Control Switch and Interlocks Test Test No. Test Procedure Test Result Action 7 In ServiceLink, open one of the following Datalink Monitor templates: Reapply the PTO or fire pump control reference parameter. If testing the PTO controls, open the "PTO Interlocks" template. If the PTO or fire pump control continues to be inoperable, con- tact the Freightliner Customer Assistance Center at 1-800-FTL- HELP or 1-800-385-4357. There may be an error in the reference parameter. Yes If testing fire pump controls, open the "Fire Pump Inter- locks" template.
Using Table 4 for PTO controls or Table 5 for fire pump con- trols, determine which interlocks are used based on the refer- ence parameter programmed into the BHM. Determine the reason for the in- terlock not being met. Either re- pair the problem or advise the driver of proper operation. While attempting to engage the PTO or fire pump using the switch in the dash, are all of the interlocks associated with the reference parameter met?
No Table 3, PTO and Fire Pump Control Switch and Interlocks Tests PTO Interlocks by Reference Parameter Interlocks Reference Parameter * Description Park Brake (from CHM) J1939 Current Gear J1939 Selected Gear Neutral (from transmission) Ignition (BHM input) 26-01032-003 PTO End of Frame Air Control, w/Ign Interlock (Smart Switch ID#38) On 26-01032-005 PTO End of Frame Air Control, w/Neut & Ign Interlocks (Smart Switch ID#38) Neutral Neutral On 26-01032-008 PTO End of Frame Air Control, AGS Trans (Smart Switch ID#38) On Set 26-01032-014 PTO End of Frame Air Control, w/Neut Interlock (Smart Switch ID#38) Neutral Neutral On 26-01032-019 PTO End of Frame Air Control, w/Park Brk Interlock (Smart Switch ID#38) On Set 26-01032-020 PTO End of Frame Air Cont,AGS Trans,Prk Brk & Neut Intlocks (Smart Switch ID#38) Neutral Neutral On Set * For a given reference parameter, all the interlocks for that parameter must be in the state shown in order for the PTO solenoid to engage.
The AGS and AGS2 designations refer to the same Mercedes-Benz transmission. References to AGS2 may be found in ServiceLink. Table 4, PTO Interlocks by Reference Parameter Business Class M2 Workshop Manual, Supplement 22, September 2012 300/7