Freightliner — Freightliner Business Class M2 Workshop Manual

Electric Wipers, Trico 82.00 Wiper Motor Replacement Replacement 8. Connect the wiring harness to the new wiper mo- tor. 1. Turn off the engine, apply the parking brakes, and chock the rear tires. 9. Using capscrews, attach the wiper motor to the mounting bracket. 2. Make sure the wiper blades are parked. If neces- sary, park them by turning the wipers on and then off. 10. Using a nut and lockwasher, attach the motor lever to the wiper motor. Torque the nut 9 to 12 lbf·ft (12 to 16 N·m). WARNING 11. Connect the batteries. Disconnect the batteries before working on the wiper assembly. This will prevent the windshield wiper motor from cycling.

The motor could cycle if the wiper linkage driveshaft is forced out of the parked position, which could result in personal injury. 12. Lower the hood. 13. Remove the chocks from the tires. 3. Disconnect the batteries. 4. Open the hood. 5. Remove the nut and lockwasher that attach the motor lever to the wiper motor. See Fig. 1 . Re- move the motor lever. 2 3 4 1 5 3 10/02/2001 f820376 1. Nut 2. Lockwasher 3. Capscrew 4. Motor Lever 5. Wiper Motor Fig. 1, Wiper Motor Assembly 6. Remove the capscrews that attach the wiper mo- tor to the mounting bracket. 7. Disconnect the wiring harness from the wiper motor. Remove the wiper motor.

Business Class M2 Workshop Manual, Supplement 0, January 2002 120/1