Electric Wipers, Trico 82.00 Washer Reservoir Replacement Replacement 1. Turn off the engine, apply the parking brakes, and chock the rear tires. 2. Disconnect the batteries. 2 3. Open the hood. 4. Remove the washer reservoir cap. 5. Remove the Torx ® fasteners that attach the washer reservoir cover to the right side of the cab. See Fig. 1 . Remove the cover. 10/02/2001 f820377 1 2 1. Washer Reservoir 2. Torx Fastener Fig. 2, Washer Reservoir 12. Attach the washer fluid line to the washer reser- voir. 1 2 13. Attach the wiring harness to the pump. 14. Using Torx fasteners and a nut, attach the washer reservoir to the cab. 15. Fill the washer reservoir with washer fluid if nec- essary.
If the washer hose was removed, con- nect the short washer hose to the pump. 10/02/2001 f820378 16. Using Torx fasteners, attach the washer reservoir cover to the right side of the cab. 1. Washer Reservoir Cover 2. Washer Reservoir Cap 17. Lower the hood. Fig. 1, Washer Reservoir Cover 18. Remove the chocks from the tires. 6. Drain the washer reservoir if necessary. 6.1 Place a container under the washer res- ervoir. 6.2 Remove the washer hose from the pump and attach a hose long enough to reach the container. 7. Remove the wiring harness from the washer res- ervoir pump. 8. Remove the washer fluid line from the washer reservoir. 9.
Remove the nut and Torx fasteners that attach the washer reservoir to the cab. See Fig. 2 10. Remove the pump from the washer reservoir. 11. Attach the pump to the new washer reservoir. Business Class M2 Workshop Manual, Supplement 0, January 2002 130/1