Freightliner — Freightliner Business Class M2 Workshop Manual

TwinFlow Fire Pump 90.00 Valve Removal, Disassembly, Assembly, and Installation 1 2 3 4 5 6 7 8 10 11 9 12 13 24 14 15 23 25 16 17 18 19 20 26 22 21 27 f190010 01/30/98 1. Transfer Drum Sleeve 2. Locating Pin 3. Transfer Drum 4. Transfer Drum Stop Pin 5. Woodruff Key 6. Transfer Bracket Seal Ring 7. Countershaft Gear Spring 8. Transfer Valve Countershaft Gear 9. Transfer Countershaft 10. Transfer Bracket Assembly (with bearings) 11. Bracket Locating Pin 12. Drum Bracket Bearing 13. Transfer Drum Seal Ring 14. Locating Pin 15. Allen-Head Screw, 1/4–20 x 3/8 16. Transfer Valve Stem Drive Gear 17. Hexhead Screw, 7/16–14 x 1-1/4 18. Sockethead Setscrew, #10–32 x 1/2 19. Gear Lock Pin 20.

Transfer Indicator Guide 21. Transfer Valve Transfer Drum Gear 22. Transfer Stem Drive Gear 23. Transfer Stem 24. Instruction Plate 25. Transfer Indicator 26. Support Stem 27. Adjusting Wheel Assembly 7.4 Install the woodruff key in the transfer drum stem. Install the transfer drum gear on the transfer drum stem. Apply Loctite ® 242 to the Allen-head setscrew, then in- stall the transfer drum gear. Fig. 1, Transfer Valve (exploded view) assembly in the transfer bracket. Then install the countershaft and the counter- shaft locating pin to lock the countershaft in place. 8. Install the transfer valve.

7.5 Assemble the countershaft gear spring in the countershaft gear, and position the Business Class M2 Workshop Manual, Supplement 8, September 2005 150/3