PowerFlow Fire Pump 90.01 General Information General Description ity to the water, causing it to build enough pressure and volume to be used for firefighting applications. The American LaFrance midship-mounted Power- Flow fire pump (see Fig. 1 ) is a high-speed, single- stage, centrifugal pumping system designed to de- liver large volumes of water under pressure. Bearings support and align the impeller shaft and other components inside the gearbox. The gearbox must be maintained on a scheduled basis. The pump has two large suction inlets, one on each side of the vehicle, though other inlets may be present.
The inlets and the internal pump outlets are on opposite sides of the pump to balance forces caused by the intake and the discharge of water. The pump consists of the following major compo- nents: A cast-iron pump body A bronze impeller and a stainless steel shaft Principles of Operation A pump gearbox A priming system A pressure-control device The American LaFrance PowerFlow pump operates on the principle of centrifugal force. Water is routed to the center of the impeller, which throws the water outward from its center. Because the water is con- Valves Mechanical Seal 3 5 4 5 2 07/10/2001 f190024 1 1 1. Mounting Brackets 2. Intake Y-Adapter 3. Discharge Manifold 4. Victaulic Couplings 5.
Extension Tubes Fig. 1, American LaFrance PowerFlow Fire Pump The impeller, which is mounted on a shaft rotated by the vehicle’s engine via the driveline, provides veloc- fined in a closed container, in this instance, the pump body, the shrouds, and the vane of the impeller, the Business Class M2 Workshop Manual, Supplement 8, September 2005 050/1