daewoo Solar 420LC-V, Solar 470LC-V — Daewoo S0101000.FM — user manual

15. Reinstall brake springs, making sure that each gets fully seated on piston. Figure 41 16. Tap roller bearing (444) race back into upper valve casing (303), using hammer and copper rod specified in tool list. Figure 42 17. Assemble valve plate (131), O-ring and upper valve casing (303). Refer to assembly that shows "R" part (2, Figure 43) of the valve plate turned away from mounting flanges (1) on side of valve plate. Lightly grease O-ring to help keep it in place during assembly. Figure 43 18. Bolt up two halves of motor casing (301 and 303, Figure 4). Be careful not to lose or damage O-ring. Tighten four 20 mm socket head bolts using a progressive, even rotation.

Make sure that all brake springs are fully seated and that valve casing inlet and output ports are correctly matched. Figure 44 S0707260 Page 25 Swing Motor Reference Number Description 1 Flange Side 2 R Port