MAINTENANCE 24.7.2 REPLACE FUEL FILTER CARTRIDGE AND IN-LINE FUEL STRAINER WARNING Engine is at high temperature immediately after the machine has been operated. Wait for engine to cool down before replacing the filter. Do not bring fire or sparks near the fuel. Prepare a filter wrench and a container to catch the fuel. Fuel catch container . . . . . Min 3.8 Filter wrench . . . . . . . . . . . . . . . . . . . . . 09019-08035 1. Set the container to catch the fuel under the filter cartridges. 2. Using a filter wrench, remove filter cartridges. 3. Clean the filter holder. 4.
Fill a new filter cartridge with clean fuel, coat the packing surface with engine oil, then install it to the filter holder. 5. When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up Ѕ to ѕ of a turn. If the filter cartridge is tightened too far, the packing will be damaged and this will lead to leakage of fuel. If the filter cartridge is too loose, fuel will also leak from the packing, so always tighten to the correct amount. WA380-3MC 3-49