MAINTENANCE After replacing the fuel filter cartridge, bleed the air from the system as follows. 6. Fill the fuel tank with fuel (to the position where the fuel gauge shows FULL). 7. After replacing filter cartridges, loosen air bleed plug. 8. Operate the plunger on the fuel transfer pump until the fuel flowing from the fitting is free of air. 9. Tighten air bleed plug (1). Bleed screw . . . . . . . . . . . . . . . . . . . 9 N 10. Use a genuine Komatsu filter cartridge. After replacing the filter cartridge, start the engine, and check that there is no leakage of fuel from the filter seal surface. In-Line Fuel Strainer 1. Disconnect and plug the fuel hoses (1). 2.
Remove and discard the in-line fuel strainer (2). 3. Install the new fuel strainer and reverse the process. REMARK Refer to the arrow on the fuel strainer for correct fuel flow direction. WA380-3MC 3-50