SERDIA UPGRADE FROM VERSION 2.5 TO VERSION 3.1 9. SERDIA UPGRADE FROM VERSION 2.5 TO VERSION 3.1 9.1 IMPROVEMENTS AND HELP WITH PROBLEMS IN COMMUNICATING WITH NOTEBOOKS/WIN 98 Since Windows 98 began to be more and more frequently used in notebook computers various problems have appeared in SERDIA’s interaction with notebooks - e.g. ‚Control unit cannot be found‘ or sporadic connection breakdowns etc.; the causes vary, depending on manufacturer. SERDIA 3.1 solves some of these problems. Another problem is being caused by a new function in Windows 98 called ACPI (Advanced Configuration and Power In- terface). It is absolutely essential to disable ACPI.
Windows 98 does not however permit this function to be disabled easily. SERDIA 3.1 therefore includes files with which you can disable the ACPI function and reactivate the “old” APM (Advanced Power Management) function (as in Windows 95). This procedure cannot be automated (because only some notebooks are affected). Your manual assistance is therefore needed. What can you do in such a case? Read the ”Readme.txt“ file supplied with SERDIA 3.1 Check whether ACPI has been enabled on your notebook:
(Start\Settings\System Control\System\Device Manager\System Components) If there are ACPI entries present, ACPI can be disabled with the file "disable_ACPI_neu.reg“ - to be found in the working directory of SERDIA 3.1. (ACPI can be re-enabled with "enable_ACPI_neu.reg“). Perform hardware detection. (Start\Settings\System Control\Hardware\Continue\Search for new hardware). NOTE: the Windows 98 installation CD may be needed. Restart computer Example with ACPI enabled 20-57