4WD PROPELLER SHAFT REMOVAL OF THE 4WD PROPELLER SHAFT (Version with front suspension) Before switching off the engine, disengage the front suspension by pressing the button in the cab for at least 20 seconds. Remove the key from the ignition and apply the park- ing brake. 1 - Using suitable lifting equipment, lift the front of the tractor so that the wheels are raised by about 10-12 cm (4-5 in.). 1 A 2 - Position a jack “ A “capable of supporting the tractor's weight under the front carrier (1). F0044660 3 - Position under the swinging suspension support (2) a stand “ B “that can be lowered through 10-12 cm (4-5 in.).
2 B F0044670 4 - Discharge the residual pressure from the suspension system by unscrewing the valve (3) two full turns. 3 F0044680 5 - Remove the clips (4) to release the differential lock pipe (5). 5 4 F0044690 4 30-65